Window guide · Before and after
Vinyl window replacement before and after: real Portland-area projects
Before and after photos are the easiest way to see what new windows do for a home. Here’s a gallery of real Clear Choice window makeovers, what actually changes when windows are replaced, and what to look for when you compare before-and-after photos from any contractor.

After: a new slider window in an SE Portland home
The short answer
In a before-and-after photo you’ll see cleaner frames, fresh color and trim, and openings that are finally square and sealed. What a photo can’t show is just as big: fewer drafts, less condensation and street noise, and windows that open and lock easily.
Vinyl replacement windows are the budget-friendly way to get that change. Fiberglass costs more and adds slimmer frames, more colors and a longer life. Either way, the installation is what keeps the “after” looking good for decades.
Before and after gallery
Every pair below is a real Clear Choice window replacement, photographed by our crews. Captions describe the window and never the address.

Before

After
Vinyl window replacement with Milgard Tuscany windows.

A bay window replaced with new white vinyl windows.

A dark aluminum slider replaced with a white vinyl window.

Before

After
New living room windows.

Before

After
New windows with fresh white trim.

Before

After
New upstairs windows.

Before

After
A new window in red siding.

Before

After

Before: King City home

After: new windows, doors, siding and paint
A tall corner window, replaced.
More before-and-after projects are on our projects page.
What changes when you replace windows
Some changes jump out in a photo. Others you only notice once you live with the new windows.
- More glass, cleaner frames. Compared with old wood sashes, most new windows have slimmer frames and more glass. Compared with old aluminum sliders, vinyl frames can be a little wider, which is worth knowing when you compare photos.
- Fresh color and finish. New windows come in white, tan and darker exterior colors depending on the line, so the frames can finally match the trim and siding.
- Square, sealed openings. Old windows often sit in openings that have shifted, rotted or been caulked over for years. A good installation leaves straight lines and clean seal joints.
- Grilles that fit the house. You can add grilles to match an older home’s style or leave them off for a cleaner, modern look.
- What a photo won’t show. Fewer drafts, less condensation on the glass, a quieter house, easier opening and locking, and lower heating bills.
What to look for in before-and-after photos
Before-and-after photos are a good way to judge a contractor’s work, not just a window brand. When you look through any gallery, including ours:
- Same angle, same light. A fair comparison shows the same window from the same spot. A dramatic “after” taken from a better angle tells you less.
- The edges. Look at where the window meets the siding and the interior trim. Clean, straight seal lines and tidy trim are signs of careful installation.
- The hard windows. Big picture windows, bays and patio doors show skill more than a single bedroom window does.
- Real projects vs. product photos. Manufacturer photos are staged. On our site, product photos are labeled as product photos, and before-and-after pairs are always our own jobs.
- The whole house. Ask how many windows were in the project and whether any rot was repaired. Most of the work in a good installation is hidden in the wall.
Insert or full-frame: how it changes the look
Insert replacement fits a new window inside your existing frame. It keeps your interior trim and costs less, but because a new frame sits inside the old one, the glass area is slightly smaller than before.
Full-frame replacement removes the old window down to the rough opening. We repair any rot, flash and seal the new window into the wall, and finish with new trim. It keeps the full glass size and lets you change a window’s size or style, which makes for the biggest before-and-after difference.
We check every window at your free estimate and recommend the right method for each one. Read more in Repair or replace your windows?
Vinyl or fiberglass: how they look
Vinyl windows are the value choice: clean, smooth frames in light and some darker colors, energy-efficient and low-maintenance. We install Milgard vinyl windows, made in Tualatin, Oregon.
Fiberglass windows cost more. Their stronger frames can be slimmer, so you get more glass, and they come in more colors, including dark exteriors. Infinity from Marvin fiberglass is our primary window line.
Both look right on most Portland homes. Compare them in detail in Fiberglass vs. vinyl windows, or see typical prices in window replacement cost in Portland.
Matching your home’s style
- Craftsman and bungalow homes. Double-hung windows, often with grilles in the top sash, keep the original look.
- Mid-century ranches. Sliders and big picture windows with clean lines suit the long, low style.
- Newer homes. Casement and picture window combinations with slim frames and no grilles.
- Historic homes. Wood or wood-clad windows and careful matching, sometimes with review by the city.
If your home is older or historic, read Replacing windows in older and historic Portland homes.
Planning your own before and after
- Take “before” photos now. Shoot each side of the house from the street and the main rooms from inside, so you’ll have a fair comparison later.
- Note the problem windows. Drafts, fogged glass, sticking sashes and water stains help us plan the right fix for each opening.
- Get a free in-home estimate. We inspect every window, bring real samples, and give you one clear, written price.
- Ask for your project photos. Our crews photograph each project as it goes, and we’re happy to share the “after” shots.
Energy-efficient replacement windows lower heating and cooling costs, cut drafts, condensation and noise, lock securely, need less upkeep, keep rain out of your walls, and add to your home’s look and value.
When you see foggy glass, drafts, condensation, rot, leaks, or windows that won’t open or lock, especially across several windows. One problem on one window can sometimes be repaired.
Usually, in a good way: cleaner frames, fresh color and straight seal lines. Compared with old aluminum sliders, vinyl frames can be slightly wider. We bring samples so you can see the frame size and color before you decide.
Slightly. An insert window sits inside your existing frame, so the glass area shrinks a little. Full-frame replacement keeps the full glass size and can even make an opening larger.
Yes. Double-hung styles, grille patterns and wood-clad or darker finishes can keep an older home’s character while ending drafts and leaks.
Yes. Every before-and-after pair on this page is a Clear Choice job. Manufacturer photos elsewhere on our site are labeled as product photos.
Vinyl windows typically run about $1,000 to $2,500 per window installed, and fiberglass about $1,400 to $4,500, depending on size, style and the condition of your openings. See our cost guide for more, or get one clear, written price at a free in-home estimate.
Yes. Visit our Tigard showroom, 7244 SW Durham Rd, Ste 900, Monday through Friday, 8:00am to 4:30pm, to open, close and compare real windows.
Ready for your own before and after?
Free in-home estimates for projects of 3 or more windows. Financing available, subject to credit approval.
- One clear, written price
- Lifetime craftsmanship warranty and leak-free guarantee
- Call us: (503) 643-3887
Free in-home quote
Takes about a minute. No pressure, no obligation.
