Window guide
Repair or replace your windows? How to decide
Foggy glass, drafts, a rotted sill or a window that won’t open: some problems are worth repairing, and some mean the window has reached the end of its life. Here’s how Portland-area homeowners can tell the difference.

Bronze windows on shingle siding
The short answer
Repair when the frame is solid and dry and the problem is one part: a broken pane, worn weatherstripping, a broken crank or lock, or a sash balance that’s given out.
Replace when the frame is rotting or leaking, several windows have foggy glass, you have single-pane or aluminum windows, or you keep paying for repairs on the same windows.
Can a window be repaired, or does it need replacing?
Most window problems start small: a draft you notice in January, a little fog between the panes, a crank that’s getting stiff. Some of those are simple fixes. Others are early signs that the whole window, or the wall around it, is failing.
The deciding question is usually the frame. If the frame is solid, square and dry, a repair to the glass or hardware can buy you years. If the frame is rotting, warped or letting water in, repairing the glass or hardware won’t solve the real problem.
So if you’re searching for window repair in Portland, start by checking the frames. The table below sorts the most common problems into repair or replace.
When window repair makes sense
Repair is usually the right call when the window is in good shape overall and one part has failed:
- A broken pane in a sound frame. A glass shop can replace the glass without replacing the window.
- Worn weatherstripping or caulk. New weatherstripping and fresh exterior caulk can stop drafts around an otherwise healthy window.
- Broken hardware. Cranks, locks and handles can often be replaced on their own.
- A sash that won’t stay up. Worn sash balances in double-hung windows can usually be replaced.
- Fogged glass in a newer window. If the window is still under its manufacturer’s warranty, the sealed glass unit may be replaceable under that warranty.
Clear Choice focuses on window replacement, so we don’t take on small one-off repairs like these. For a single broken pane or a worn crank, a local glass shop or handyman is often the best choice.

The same SE Portland home after a full-frame replacement
When replacement is the better choice
- Rot in the sill or frame. Soft, spongy or crumbling wood means water has been getting in for a while.
- Several windows with foggy glass. Failed seals across the house mean the windows are reaching the end of their life.
- Single-pane or aluminum windows. They can’t be repaired into energy-efficient windows.
- Drafts that new weatherstripping doesn’t fix. The problem is the frame or the glass, not the seal.
- Leaks and water stains. Water getting past a window damages the wall below it.
- Repeated repairs. Paying for the same fixes again and again usually costs more than replacing.
Repair or replace: problem by problem
A quick way to sort out the most common window problems we see in Portland-area homes:
| Problem | Repair may work if… | Replacement is better if… |
|---|---|---|
| Foggy glass (failed seal) | A newer window under warranty: the sealed glass unit is replaced | Several windows fogging, or older windows out of warranty |
| Broken pane | The frame is sound: a glass shop replaces the pane | The frame is damaged, or it’s an old single-pane window |
| Drafts | Weatherstripping or caulk is worn | Drafts come from the frame, or the glass is single-pane |
| Rot | A small, dry, surface spot on trim | Soft wood in the sill or frame, or water in the wall |
| Hard to open or lock | A broken crank, lock or sash balance | Warped or swollen frames, or windows painted shut |
| Condensation | Indoor humidity is high | Cold single-pane glass or aluminum frames sweat all winter |
What about foggy windows?
Fog or haze between the panes means the seal around the insulated glass has failed. Moisture gets in, and the insulating gas between the panes escapes, so the window loses much of its energy efficiency.
Some services offer to “defog” windows, but cleaning the glass doesn’t restore the original seal or the insulating gas. In a newer window under warranty, replacing the sealed glass unit can make sense. When several older windows are fogging, it’s usually time to replace them.
Why rot changes the answer
Our long, wet Portland winters are hard on wood windows. Once water gets past a failing seal or old caulk, it soaks into the sill and frame, and rot often spreads further than you can see.
A small, dry spot on exterior trim can sometimes be patched. But when the sill or frame is soft, the right fix is full-frame replacement: removing the old window down to the opening, repairing any damage, and flashing the new window properly so water drains out instead of in.
Repair costs vs. replacement costs
A single repair usually costs far less than a new window, which is why repair is worth considering when the window is otherwise healthy. The math changes when you’re repairing the same windows again and again, when repairs don’t stop the drafts, or when you’re also paying higher energy bills every month.
Replacement costs depend on the number of windows, their size and style, the frame material, and whether the job is insert or full-frame. See window replacement cost in Portland for typical price ranges and an instant estimate.
How Clear Choice helps
Not sure which way to go? Start with a free in-home estimate. We’ll inspect your windows and frames, check for rot and leaks, and give you an honest assessment. If replacement makes sense, you’ll get one clear, written price.
- Replacement windows from Infinity from Marvin, Milgard and other trusted brands.
- Our own crews, licensed and insured, installing in Portland-area homes since 2002.
- A lifetime craftsmanship warranty and a leak-free guarantee on every installation.
- EPA Lead-Safe Certified, for homes built before 1978.
Replacement fixes the whole window at once: new insulated glass, a tight-sealing frame and working hardware. You get lower energy bills, fewer drafts and less condensation, and you stop paying for repeat repairs. Full-frame replacement also lets us fix hidden rot around the opening.
Replace when the frame or sill is rotting or leaking, several windows have foggy glass, you have single-pane or aluminum windows, or you keep repairing the same windows. Repair when the frame is solid and only one part has failed.
The fog means the glass seal has failed. Cleaning or “defogging” doesn’t restore the seal or the insulating gas. A newer window under warranty may get a new sealed glass unit; older windows with failed seals are usually best replaced.
A small, dry spot on exterior trim can sometimes be patched. If the sill or frame is soft, water is already in the wall, and full-frame replacement is the reliable fix.
We focus on window replacement and don’t take on small one-off repairs. For a single broken pane or a worn crank, a local glass shop or handyman is often the best choice. If several windows have problems, we’re happy to give you a free estimate.
It varies with the material and how well the window was installed. Many original windows in Portland-area homes are now 30 to 60 years old. Quality vinyl and fiberglass replacement windows commonly last for decades with basic care.
Not sure whether to repair or replace?
Free in-home consultation. Financing available, subject to credit approval.
- One clear, written price
- Lifetime craftsmanship warranty and leak-free guarantee
- Call us: (503) 643-3887
Free in-home quote
Takes about a minute. No pressure, no obligation.
