Gutter guide
Gutter Replacement Guide: Signs, Materials and Choosing an Installer
In a place that gets as much rain as Portland, gutters do a lot of work. When they fail, water ends up where it does the most damage: against siding, in the foundation and under the roof edge. Here’s how to tell when it’s time and what to choose.
The short answer
Replace gutters when they leak at many seams, pull away from the house, sag or overflow even when clean, or when rust, rot behind them or water damage around the foundation shows they’re no longer doing their job.
For most homes, seamless aluminum gutters sized for the roof, with enough downspouts and extensions to carry water away from the foundation, are the best value. Copper and steel are options for specific looks or extra strength.
Signs you need new gutters
- Leaks and drips at seams or corners, even after resealing.
- Sagging or pulling away from the fascia, or loose hangers.
- Overflowing in heavy rain when the gutters are clean, which can mean they’re undersized or poorly pitched.
- Standing water in the gutter after rain stops.
- Rust, cracks or splits in the gutter or downspouts.
- Peeling paint or rot on the fascia and trim behind the gutter.
- Water problems below: erosion in flower beds, a damp crawlspace or basement, or stains on siding.
Some of these, like a single loose hanger or a clogged downspout, are simple repairs. When several show up at once, or the gutters are decades old, replacement usually makes more sense.
Why gutters matter in the Northwest
A single inch of rain on a typical roof sends hundreds of gallons of water toward the edges. Working gutters collect it and send it away from the house. Failing gutters let it pour down siding, soak window and door trim, pool against the foundation and back up under the roof edge, where it rots fascia and decking.
Seamless vs. sectional gutters
Sectional gutters are joined every few feet, and every joint is a place to leak. Seamless gutters are formed in continuous lengths to fit each run of your roofline, so the only joints are at corners and downspouts. They leak less, look cleaner and need less upkeep.
Gutter materials compared
| Material | Strengths | Things to know |
|---|---|---|
| Aluminum | Rust-resistant, light, many colors, good value | The most common choice; heavier gauges resist dents better |
| Steel | Strong; handles heavy loads and impacts | Can rust over time if the coating is damaged |
| Copper | Very long life; develops a natural patina | Highest cost; used mostly for its look on traditional homes |
Size matters as much as material. Larger roofs and steep pitches send more water to the edge, so larger gutters and more or bigger downspouts may be needed to keep them from overflowing.
Gutter guards, downspouts and drainage
- Gutter guards: helpful under trees by keeping out leaves and needles, though none are maintenance-free. Fir needles and moss can still collect on top.
- Downspouts: enough of them, in the right places, keep gutters from overflowing at the far end of a long run.
- Extensions and drainage: downspouts should discharge well away from the foundation, onto splash blocks, extensions or into a proper drain.
- Fascia: rotted fascia boards should be replaced when the gutters come off, so the new gutters have something solid to hang on.
How to choose a gutter installer
- Check the license and insurance (Oregon CCB or Washington L&I).
- Ask whether the gutters are seamless and what gauge the material is.
- Ask how gutter size and downspout locations are chosen for your roof.
- Make sure the estimate covers removal of the old gutters, fascia repairs and cleanup.
- Ask what the workmanship warranty covers.
- Read recent reviews and ask to see similar work.
Keeping gutters working
- Clean gutters at least twice a year: late fall after the leaves drop, and spring. More often under evergreens.
- Flush downspouts with a hose to check they flow freely.
- Watch the gutters during a heavy rain once a year to spot overflows and drips.
- Keep branches trimmed back from the roof.
- Fix loose hangers and leaking corners promptly.
Gutters work together with the roof. If your roof is also aging, see our roof replacement guide. When you’re ready, request a free in-home quote.
Aluminum and steel gutters commonly last around 20 years or more with regular cleaning; copper can last far longer. Sectional gutters tend to develop leaks at their joints sooner than seamless gutters.
For most homes, yes. With no joints along each run, seamless gutters leak less, look cleaner and need less maintenance than sectional gutters.
It depends on the roof area, the pitch and how much rain the area gets. Many homes use 5-inch gutters, while larger or steeper roofs may need 6-inch gutters and larger downspouts to avoid overflowing.
They help, especially under deciduous trees, but none are maintenance-free. Fine debris like fir needles and moss can still build up, so guards should still be checked and cleaned periodically.
It’s often a good time, especially if the gutters are old or the fascia behind them needs repair. Replacing them together avoids damaging new gutters during a later roof replacement.
Gutters overflowing or pulling away?
Free in-home consultation. Financing available, subject to credit approval.
- One clear, written price
- Licensed, insured and local since 2002
- Call us: (503) 643-3887
Free in-home quote
Takes about a minute. No pressure, no obligation.
